can't see others in belma.

[goofu]

i was told to "port-forward" the ports listed in belmaserverconfig.exe to see others in belma, which i tried, but without success after several router/computer restarts. i also made sure that my firewall doesn't block any incomming/outcomming messages from belma.exe. and yet, it still doesn't work

here's a pic of the router configuration


i really can't see whats wrong, anyone got any ideas?

thanks in advance

[goofu]

hmm, that ip should not be belma ip adress, it should be your own, atleast thats the case in my router setup, try changing it to your own.

if you dont know ur ip adress just do "start" -> "run" -> "cmd.exe" and type "ipconfig/all" you get list of teh and your ip is in teh "ip adress" part obviously

k, i tried to change the port IP to 10. 0. 0. 2 as that's my own IP according to ipconfig /all, and still, it doesnt work
thanks for the help though

any other ideas?

[totem]

try the adress of the gateway, probably some private adress (they often begin with 192.168.xxx.xxx)

[wjelo]

can't see shit x_X

[Orcc]

10.0.0.2 is not your ip, it's just the address to your router.

[welle]

try http://whatsmyip.org/

[goofu]

k, tried using my IP according to http://whatsmyip.org/, still doesnt work
really wierd isnt it

[goofu]

thats what my IP seems to be, which i tried before, and didnt work. then i tried the ip according to http://whatsmyip.org, didnt work either. actually, i just tried all addresses i could find on the picture above, none of them worked.

i'm really starting to wonder if the problem has something to do with the IP since i have tried many different IP's, maybe there is another problem, i dunno

thanks for the help so far anyway

[zebra]

I have same kind of zyxel adsl modem and it's working fine.
Yes, that 10.0.0.2 should be right. But note that the ip may change if you restart your machine if you haven't reserved it for your machine. The error might be in your firewall if it's blocking those ports (check windows firewall too). Also check belmaserverconfig that you haven't changed the ports it's using.

[totem]

you could try changing your router to bridged mode (NAT off) and also switching DHCP off

+1

[goofu]

lol, i just fixed the problem. the reason was me being silly.
the working IP was 10.0.0.2.. but when i tested that ip, i entered the balle running, but i couldn't see others, and the reason for that is that "see others" was turned off for that balle. i thought i could see others in all balles, but i was wrong..

again, thanks for the help everybody

[SveinR]

If you can see the "Players online" and "Battle results" lists, then everything works.